Timer Relay DC 12V 20A Programmable Digital Time Cycle Delay Switch Module 1500W 220V 110V ON-OFF Control 0-999 Second Min Hour
DC12V / AC110V-220V Timer Relay DC 12V 20A สวิตช์รีเลย์ตั้งเวลา เปิด/ปิด อัตโนมัติ โดยการตั้งเวลาตั้งแต่ 0-999 วินาที 0-999 นาที 0-999 ชม.
Specifications:
Time range: 0-999 seconds 0-999 m 0-999 hrs
Voltage: DC12V / AC110V-220V
Relay: 20A
Working current: 10A (max)
Power: 500W (max)
Size: 79 * 26 * 43mm
Hole size: 72 * 40mm
Instructions:
Please pay attention, for your first use, you need to wait 6s after your setting data, the module will save the date you set after 6s.
Short press SET button: If you start time setting mode, Nixie tube will flash, you can adjust T1 and T2 time with + button and - button, please wait 5 seconds after setting date, module will save the date you set after 5. second
Press and hold the SET button: If you start the parameter setting mode There are two group parameters for your choice: P0 and P1. You can change P0 or P1 by pressing SET under parameter P0 and P1. You can set timing mode by + button and - button.
P0--0: timing mode: 0 --- 999 seconds
P0--1: timing mode: 0 --- 999 minutes
P0--2: Timer mode: 0 - 999 hrs.
P1--0: The relay will connect after you delay T1 time.
P1--1: Relay will disconnect after you delay T1 time.
P1--2: The relay will connect after you delay T1 first time, then relay will disconnect after you delay T2 finish.
P1--3: Relay will disconnect after you delay T1 first time, then relay will connect after you delay T2 finish.
P1--4: Relay will connect after you delay T1 first, then relay will disconnect after you delay T2 which is circuit.
P1--5: Relay will disconnect after you first delay T1, then relay will connect, after you delay T2, it will loop.
Example: A customer needs 10 seconds to start up and 20 seconds off. The settings are as follows:
T1 set time 10, T2 set time 20
P0 - 0 (T1 interval is seconds)
P1--5 (timer operation mode)
Package included:
1 x Digital Display Time Relay